🌉 SET: Lego DUPLO train BRIDGES (optimized)

prusaprinters

UPDATE 26.2.2022:added V2, V3 for pillars (3mf for tighter connection to other duplo bricks and for better overhang printing)added short straight track (the size of ordinary straight original track)with big side protrusions, which are handy when put on the top of the bridge (helps train to go over)UPDATE 25.2.2022:added V3 models for long straight tracknow contains big side protrusions (same as on angled bridges) for better grip, so the train still can continue if it is on top of the bridge, but wagons are still going upimportant for 2 wagons behind train machinealso fixed missing brim After simple tracks (https://www.prusaprinters.org/prints/126988-set-lego-duplo-train-tracks-optimized) is here bridge model. Intro:my goal was bridging system done only from 1 type of bridging partso just print 4 pieces of the same type, and that's itunlike Lego original or Thingiverse imitation where you need 2 or 3 different parts on each side of the bridgealso I wanted simple construction for small filament consumptionwell… this riddle took me a while and after lots of tries  I have achieved proper angles, dimensions & curvature for non problematic train rideso it seems like a working bridgeSorry Prusa Mini users, this is too big for your plate :(  2 shapes of bridge construction for now:MILDcurvature for train also with wagonsROLLERCOASTER 🎢well just for fun 🤑BUT please note: This shape is not for train with wagons! Only your train machine WITHOUT wagons will be able to drive it. For wagons attached to machine, the curvature is too extreme.use at your own risk ;)  2 types for each shape:NORMALmore bottom connectors → more reinforcementMINIMALISTIConly connectors on both ends → less reinforcementnote that it is fully stable, but the construction can be more likely broken when stepped onto etc.faster print Characteristics:optimized print (fast, simple, minimized filament consumption)I was printing it on 200% speed after first layer no supports Added also additional optional construction for more usage:pillar supporting the bridge funny long simple track (for big bridge gap)  Print info:PLA, 0.4mm nozzle, 0.2mm layer0.3mm layers will look ugly on track curvature, so use at least 0.2mm layersalso it is problematic with variable layer length, because angled faces are almost at all heights, so you still need to print 0.2mm layers on most of the printbrim needed!use outside brimsee 3mf files Usage:please note, that your train may still have problems driving up, if it's too heavy or have too many wagons etcbut my train with 2 wagons was able to drive mild variantRollercoaster is risky,  only machine alone will be able (hopefully) to drive it    HAPPY BRIDGING! :) Hope you (and the kids) will enjoy it.