Zoom H2N table mount

thingiverse

This is a support system for my Zoom H2N microphone, which I use to record dialogue for my YouTube channel: https://www.youtube.com/channel/UCA1GXVw8XCevw54rMuByuXw My portfolio can be found at www.boredotterstudio.com Post-Printing Shopping List In order to print this project, you'll need a slicer like Cura or another software that can mirror the two "lamp bit" pieces. Here's what you'll need to buy: 1x IKEA lamp called TERTIAL 1x 3m USB-mini to USB 2.0 cable 2x pieces of 10x10x500mm square pipes or angled irons 2x tension bearing springs for the bottom of the arm 5x M3 bolts at least 30mm long 7x M3 nuts 3x M6 bolts at least 60mm long (only 2 if you don't use the extension arm) 4x M6 nuts (only 2 if you don't use the extension arm) If you want to add an extension arm or a more durable support using springs, you'll need: 4x tension bearing springs with a diameter of 10mm Stuff to Print For just the mount without metal springs: 1x Mikrofonstöd Zoom 1x Mikrofonstöd lampa 1x Mikrofonstöd knapp rättad 3x "Zoom skruv" or Zoom "skruv liten". You can mix these pieces however you like. For the version with metal springs: 1x Mikrofonstöd Zoom rättad 1x Mikrofonstöd Zoom lös platta 1x Mikrofonstöd knapp rättad 1x Mikrofonstöd lampa 1x Zoom skruv trat 2x "Zoom skruv" or Zoom "skruv liten". You can mix these pieces however you like. For the extension arm: 1x lampa bit 1 v2 (plus one of these pieces flipped) 1x lampa bit 2 v2 (plus one of these pieces flipped) 1x lampa mittbit 1x lampa mittbit mutter You'll also need a sufficient number of "klipp till IKEA lampa" for the USB-cable to reduce all vibrations. How I Designed This