Zimmant MP Mini Logitech C270 Camera Mount Remix

thingiverse

This is a Customized Combination of the C270 Tripod Mount and the MP Mini Tripod Camera Mount. With this setup, you can easily add multiple arms to achieve the perfect height or angle for your print. It also allows for more precise timelapse photography, as the camera moves with the print in real-time. However, some adjustments may be needed to ensure a snug fit between the arm and the triangular base. The initial attempt was a bit too tight, but the uploaded version should resolve this issue. Note that the focus ring needs to be printed at 98-99% scale for a secure fit. A print at 100% scale resulted in a loose fitting ring. Using 98% scale yielded a snug fit. When attaching the clips, you may need to add nuts or washers for spacing, depending on their orientation. To secure the mount to bed clips, I used two M3x20 screws with one nut and washer for spacing and another nut to lock it in place on each clip. The arms themselves use M3x20 screws and nuts, while the top arm that connects to the hinge requires an M3x25 screw. Print Settings: Printer: Mp Mini Select Rafts: No Supports: No Resolution: 0.2 Infill: 30% Notes: To achieve a better fit on the camera's lens, scale the focus ring to 98 or 99%. Additionally, double-check that the "tripod arms" are flat on the bed when importing them into My S3D, as they were initially set to 0.2 above zero on the Z-height axis.