Zesty Nimble & Precision Piezo Orion mount for RatRig V-Core

thingiverse

I've been using this mount for about a month now and it's working flawlessly. This mount is specifically designed to be used with the Precision Piezo Orion clamp, created by user Moriquendi. The hotend I'm using is E3D V6, paired with an excellent fan designed by user thed0ct0r. Check Printed_parts.xlsx for STLs that have been used in this setup. First, insert M3 hex nuts under the mount. They should stay in place with friction, but if yours don't, apply a small drop of glue to prevent them from falling out when mounting the Precision Piezo clamp. Next, ensure that the M3x20 flat head screws are properly tightened to secure the Precision Piezo Orion clamp to the Zesty Nimble mount. I initially left them slightly loose, which caused the piezo element to act erratically. Another thing to note is that I didn't have smaller screws to secure the Zesty Nimble to the mount, so I used those 40mm screws that came with the Nimble and printed small adapters for tightening the Zesty Nimble to the mount. The 5.20mm adapter needed to be filed slightly to sit properly over the Zesty Nimble. For links to the printed parts used in this setup, check Printed_parts.xlsx. Also included is a BOM with links to McMasterr-Carr catalog as a separate file, BOM.xlsx. BOM: * 1 pc M3x8mm socket head screw * 2 pcs M3x20mm socket head screws * 1 pc M3x30mm socket head screw * 4 pcs M3x20mm flat head screws * 1 pc M3x35mm flat head screw * 6 pcs M3 hex nuts * 1 pc 5015 Radial Fan