Zero offset Clamped GE5C Mount for Voron 2.4

prusaprinters

Spherical bearing Z joint for Voron 2.4Update 11-11-2023: Slightly adjusted models per feedback.Github for up to date modelsWhy ?Unlike Hartk's GE5C mod, this has no offset mounting to the A/B drives or front idlers, meaning it's a direct replacement for stock. (Hartk's version does fit but not perfect).No possibility of the bearing sliding around; it's locked rigidly in place with adjustability in case the plastic creeps over time.Looks cool :)BOM:4X GE5C/EGLM-054X M5x10 1mm Shim4x M5x25 SHCS4x M3x1216x M3x20 SHCS12x M3x16 SHCS12x M3x5x4mm Heat inserts8x M3x6 BHCS (SHCS can be used but sticks out slightly)8x M3 Hex nut(Optional) 4x 5mm ID 8mm OD 4mm tall Aluminum spacers instead of printed. I bought mine here https://www.aliexpress.com/item/1005003018758421.htmlKit available at: https://central3dprinting.com/products/zero-offset-ge5c-for-2-4 Instructions For now, use the pictures. Also, tighten the Ge5C clamping screws until everything is tight; they shouldn't be bottomed out.If you use EGLM-05 you can feel if you have tightened it too much because it starts to bind.Contact me on discord @Torxfighter if you have any questions or feedbackThank you NyxCode, jovdvyver, NotSoCreative and ReXT3D for Early testing and feedback!.