Zero-Cam Base Case

thingiverse

A version of Walter's Customizable Case is being designed to fit a Raspberry Pi Zero, an 8MP Camera Module, a 3.7v 700mAh LiPo battery, and a PowerBoost 500 Charger. To accommodate the camera and external power switch, modifications will be made using a Dremel tool, including a peep hole for the camera. The project is still in its early stages, so it's uncertain how long it will record on a full charge with only 700mAh of power. Updates and photos will be shared as they become available. A PRO TIP: removing the camera's IR module can convert it into a night vision camera, which works well in daylight but may have unusual color resolution. An IR illuminator is also required for this setup (this one is recommended for $13). The estimated cost of this project is around $77 plus shipping from Adafruit, or approximately $100 if the night vision upgrade is chosen. This estimate does not include filament or material costs, nor an mSD card and switch, as these items are assumed to be readily available. If you have access to a 3D printer, the estimated material cost for this project would be around $0.08USD, assuming basic print settings with average FDM PLA filament (approximately $32.95). This estimate is based on using an Ultimaker2+ and Aurora brand filament. Parts required for this project include: * Raspberry Pi Zero v1.3 Camera Pack: $39.95 * PowerBoost 500: $14.95 * LiPo battery: $12 (available in packs of two, which can be connected in series to provide 1400mAh) DIY guides and tutorials that may be useful for this project include: * How to run Zero via lipo: https://github.com/NeonHorizon/lipopi * RPi setup of Motion software: http://www.instructables.com/id/Raspberry-Pi-as-low-cost-HD-surveillance-camera/ * Updated Motion Setup: https://scottontechnology.com/raspberry-pi-webcam-server-using-motion/ For those who want to convert their camera module to night vision mode, a tutorial on removing the IR filter can be found at: https://www.youtube.com/watch?v=HtjkNyEt4xU. This project was created using a customized version of Walter's case design, which is available on Thingiverse. Despite having access to advanced CAD software, the author has no experience in 3D modeling and relies heavily on the Customizer tool for creating designs. Using the following settings: * hingeLengthScale = 1.1 * interiorLength = 70 * rimInset = 0.6 * interiorFillet = 2.0 * hingeThickness = 0.3 * interiorWidth = 35 * hingeFillet = 3 * sidewallWidth = 1.1 * lidInsetOffset = 0.0 * lidInsetHeight = 1.2 * coverThickness = 1.0 * tabSize = 1 * interiorHeight = 35 * hingeWidth = 12