Z-VENT - Comprehensive ventilation upgrade for Zortrax M200

thingiverse

The text you provided appears to be a changelog for some 3D printed parts, specifically ventilation systems and shrouds for 3D printers. It contains information about different versions of these parts, their compatibility with various hotends and heating blocks, and modifications made to improve performance or fix issues. Here's a summary of the text: * The Z-VENT_V11.1.stl file is a newer version of the ventilation system that uses three screws to attach the fan from bottom to top. * There was an oversight in the design of the upper Z-VENT colliding with the right-hand bars-lock block, so a new cable guide was added to the Z-VENT_upper_V7.2_aliex.stl file, which mounts on the heatsink using M3x12 screws instead of two. * The V11\_Z-Temp\_spacer.stl file is a spacer for use with the Z-temp hotend and requires no. 2 M3x25mm screws to lock it to the heatsink. * New versions of the ventilation system, including Z-VENT_V12.3.1.stl and V12.3.1\_Z-Temp\_spacer.stl, were added, which are incompatible with the original heating block but designed for a reduced volume heating block. * A modified version of the ventilation system, Z-VENT\_V12.3.2.stl, was also added, where the two rear ventilation openings have been spaced 2 mm from the heating block, and a new design for a heating block (Z-HOT\_MS) suitable for the original V2 hotend or the Micro Swiss upgrade. * Two new files, Z-VENT3010\_ZC+.stl and Z-STORM\_ZC+.stl, were added, which are compatible with the Zcory+ hotend but not the original heating block. Overall, this text provides information about various modifications and updates to 3D printed ventilation systems and shrouds for 3D printers.