Z-Coupler M8 and M6 to 5mm, anti-Z-Wobble
thingiverse
Standard Coupler Replacement Print Settings Printer Brand: RepRap Printer: Prusa i3 C Rafts: Yes Supports: No Infill: 25% or more Notes: Use a square grid infill pattern, ensuring that each crossing is situated directly under the nut shafts. ABS filament is highly recommended for optimal results, but PLA can also be used successfully. Post-Printing This component is not ready to use immediately after printing! To achieve a perfectly straight 5mm bore, carefully drill from the side featuring the small cylindrical protrusion using a 5mm drill bit, continuing through its entire length. Next, remove this protrusion by cutting it away; its sole purpose was to facilitate accurate positioning of the drill bit. Subsequently, refine the M8 thread by cutting it smooth. Then, insert M3 nuts, centering them with a screw before securing them in place using glue. For added stability and space efficiency, use standard screws instead of grub screws whenever possible on your printer setup.
With this file you will be able to print Z-Coupler M8 and M6 to 5mm, anti-Z-Wobble with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Z-Coupler M8 and M6 to 5mm, anti-Z-Wobble.