Z Axis Reinforcement for Prusa MK2s

thingiverse

This mod creates a more stable frame that allows for one or more filament spools to be placed above it. The modification does not require any changes in Firmware. The bottom parts connecting the motor to the frame are actually a remix of the Original Parts, which can be found at https://www.prusa3d.com/prusa-i3-printable-parts/. This mod does not require any additional hardware or software changes. To install it with 0mm reinforcement, you'll need to visit https://www.thingiverse.com/thing:3337357. However, if you want to install the mod with a 18mm reinforcement, you will need to make small software changes. The necessary parts for this installation can be found at https://www.thingiverse.com/thing:3334944. If you're looking to install the mod with 30 or 33mm of reinforcement, you'll need to make extensive software and hardware changes. The necessary parts for this installation can be found at https://www.thingiverse.com/thing:3337371. To assemble this mod, you will need the following parts: * 2 pcs - 608zz bearing * 2 pcs - m8x400mm threaded rod * 2 pcs - m8x450mm threaded rod * 8 pcs - m8 nut * 8 pcs - m8 washer (outer diameter should not exceed 18mm) * 8 pcs - m3x20mm * 8 pcs - m3ns nylon lock nut din 985 * 185g PET-G (21% infill, 2 perimeters) * 2 pcs - m4x40mm * 2 pcs - m4x20mm * 4 pcs - m4 nut