Z Axis Cable Chain for Anet A8

thingiverse

Human: I created this Z-axis drag chain to work seamlessly with the X-axis chain, which was originally designed by TNS (https://www.thingiverse.com/thing:2105040), and the Electronics Case designed by Lindkj (http://www.thingiverse.com/thing:2294191). The chain links feature two versatile options: 16 Links of either the closed chain links crafted by sukhoi27 (http://www.thingiverse.com/sukhoi27) or the open chain links secured with zip ties, designed by Starwhooper (http://www.thingiverse.com/thing:1905344).\r\n\r\nTo print the Electronics Case Mount effectively, rotate it 90° in the Y direction so that the tabs for attaching the chain links are printed stronger and less likely to break off. Use supports from the build plate and extra cooling when bridging.\r\n\r\nThe Motor Mount should be printed with the orientation that allows it to drop onto the build plate using supports, which also prints strong tabs.\r\n\r\nYou will need to drill two holes large enough for M3 screws in the top of your Electronics Case to attach the Electronics Case Mount. Center the mount between the tab slots with it touching the USB connector. This position should align it with the cutout on the Electronics Case Cover, and allow the cover to be removable without the electronics case chain mount coming off with it.\r\n\r\nAll of the wires to your print head will need to be lengthened in order to utilize this drag chain. I extended my wires by cutting them, soldering a new section in place, and insulating them with heat shrink.\r\n\r\nI printed my chain with black PLA, but the photo does not showcase the best detail. It was taken before I lengthened and installed the wires in it.