Z-23 Rev 2.2c Creality Mod
thingiverse
**UPDATE MAY 31:** The gcode has been upgraded to rev 2.2c, while other files remain at 2.2b. This upgrade affects only the gcode generated from the same geometry, tailored specifically for PETG, a material significantly different from PLA. Temperature is not the only factor; numerous settings must be adjusted. Although the process is not yet perfectly optimized and generates a lot of cobwebs, it performs well now. Crucially, the "wires" making up the fan guard print flawlessly. PETG is better suited for this than PLA, as it drops almost fully liquid onto the model from a greater height (approximately 0.04 mm extra in Z). With PETG, there's minimal vertical and horizontal force exerted on the model. **INTRO:** This design will be similar to the Z-19, with one key difference: instead of using the stock model fan as the top fan, it accepts a 5015 or 5115 blower. For general information about this project, see the Z-19: https://www.thingiverse.com/thing:2911981 **Why Z-23?** The reason for choosing 23 is that it's the next prime number after 19. **A big thank you to makkuro**, who created a custom text customizer for us, which I use to display the name and revision number whenever the revision changes. The customizer can be found here: https://www.thingiverse.com/thing:3094095
With this file you will be able to print Z-23 Rev 2.2c Creality Mod with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Z-23 Rev 2.2c Creality Mod.