Yet Another Duplo Brick Generator

prusaprinters

<p>It's more or less the original duplo brick generator with some details picked and tweaked a bit from the "Adjustable Improved" version.</p><p>I added:</p><ul><li>round edges and rim on studs (cost a bit longer rendering, if needed the original stud code still there).</li><li>the cuts in the internal cylinder are optional (easier to print without brim).</li><li>option to print 1/2 heigh bricks</li></ul><p>print "full body" bricks, the bottom protrusion is just as for 1/2 brick height (intended for further brick modeling, e.g. Hubelino tracks) </p><p>I printed it out of PLA on Creality Ender3, used Cura 3.6.0 for slicing. I used the original 0.2mm layer height profile in Cura and at least the 2x4 flat brick seems to work well together with original Duplo.</p><p>I updated the scad file (changelog inside) and dropped all the pre-generated bricks as they were obsolete (I'll eventually add them back generated with the new scad file).</p><p>To not forget “the credit”. This model is based on https://www.thingiverse.com/thing:3113862.</p><p> </p><p>TODO for future:<br/>it would be nice to think about recessing the central cylinders as on original Duplo brick. After that it might be even compatible with classic Lego bricks the same way as Duplo is.</p><p>Category: Playsets</p>