Yamaha Banshee / RZ350 water pump cover and clutch cover insert + neutral switch

cults3d

My designs are protected by copyrights laws. It is not authorized to distribute or sell any of my designs without prior written authorization from myself. Even if you modified my original design. Custom designs for the famous yamaha 350 twin. Started out on a RZ350 water pump cover replica because the oil pump does not fit under a banshee cover and the original one is not available anymore and then made a matching clutch cover insert. The water pump cover insert is tricky to print, has 60degrees overhang, make sure your printer is dialed in perfectly to print without supports or use tree suports otherwise. I can do custom logos for a fee (depending on complexity of the design), just contact me through e-mail at Brissmoto@outlook.com I made a bunch of different custom designs for the water pump cover with 350, 421 or no inscriptions at all and two different hex sizes + my logo. The water pump cover was designed to clear the RZ oil pump. Feel free to reach out if you think there is a missing configuration. The clutch cover insert, you can push out the metal sleeves from the stock cover and press the in your new 3d printed cover. Careful, if they are too tight, heat up the sleeves a little with a lighter and they'll make their way into the cover without breaking it. As a bonus i've added a file for a neutral switch block off plate. Never seen one of then not cracked. my design uses regular screws rather than taper/flat head screws. Also made one to act as an actual neutral switch. You just need to thread the hole with M4x0.7 threads and insert an flat head M4 bolt from behind (with some scelant) and use a nut to lock it from outside.