Yamaha Banshee / RZ 350 / TZ250 / RD350 LC neutral switch 1L9-82540-00-00 and block off plate

cults3d

Model designed to use regular screws to prevent the flat head screws from cracking the part. 2 models available, as a replacement neutral switch or as a block off plate without any holes. PETG, ABS or Nylon should all be OK for the application, but PETG might be more prone to getting damaged if you live in a place where it gets really hot. Once printed, make M4x0.7 threads in the hole. Then insert a flat head M4x15 bolt in there with a drop of engine scelant/silicone on the head to prevent leaks and lock it on the other side with a nut. I used a drop of locktite on the bolt to prevent nut from backing out. Do not use locktite on plastic, it will crack. I used M5x12 wide head screws to hold it in place, https://www.mcmaster.com/96660A211/