XYZ Plane

pinshape

I've built in the necessary supports directly into the print design. Cura's automated supports kept causing me issues, so I took matters into my own hands. Layer Height: .1mm Print Speed: 40mm/s Printing Temperature: 195°C Bed Temperature: 60°C Platform Adhesion Type: Raft with a .22mm air gap Retraction Speed: 50 mm/s Retraction Distance: 4.5mm Initial Layer Thickness: .3mm Travel Speed: 70mm/s Bottom Layer Speed: 15 mm/s Infill Speed: 70 mm/s Top/Bottom Speed: 30 mm/s Infill Percentage: 0%