XY Chain Mod for V-Core 1.x and V-Core 3

thingiverse

__Hey Guys,__ UPDATE SEE BELOW here is my XY cable chain mod fitting V-Core 1.x and V-Core 3 with the genuine EVA and Easy-Mod created by Paweł Kucmus which can be found here: <a href="https://main.eva-3d.page"> EVA-3D Main Page</a>. This Mod is for use with the BMG extruder mount. For other extruders you will have to modifiy the extruder mount yourself for use with the XY_Chain_Top part <h1>I've only tested it on my V-Core 1.3 Pro so you use it on your own risk with other printers / configurations.</h1> __For V-Core 1.x you'll need to print the following parts depending on the Easy-Mod version you use.__ __For V-Core 1.x with Easy-Mod up to Version 2.3 (MGN15):__ XY_Chain_Tower_Lid_universal XY_Chain_MGN15_Top XY_Chain_Tower_VC1.x_up_to_EM2.3 __**UPDATED** For V-Core 1.x with the upcoming Easy-Mod 2.4 (MGN12):__ XY_Chain_Tower_Lid_universal XY_Chain_MGN12_Top XY_Chain_Tower_VC1.x_EM2.3 - _File has been removed_ XY_Joiner_Left_VC1.x_MGN12_M3_Mod - _File has been removed_ XY_Chain_Tower_VC1.x_EM2.4_M5 - _new Chain Tower to work with the official 2.4 XY Joiner_ __For V-Core 3 you'll need to print the following parts:__ XY_Chain_Tower_Lid_universal XY_Chain_MGN12_Top XY_Chain_Tower_VC3 __Optional__ XY_Chain_Tower_Slider_w_cable_guide I won't list a complete BOM for the screws so you have to check that for yourselfes. The Chain i am using with this mod is <p>this one: https://www.amazon.de/dp/B07VGC8QJR/ref=cm_sw_em_r_mt_dp_MD6ZV0B5PD86RC20C570?_encoding=UTF8&psc=1 To connect the chain to the frame just use the provided end pieces. __If you like my work and want to support me, you do this. Here is my Ko-Fi link.__ <p>Ko-Fi: <a href="https://ko-fi.com/supersniffles/"> Buy me a Coffee</a>.</p> Whether you do it or not is entirely up to you. I appreciate any support! Thanks alot and i hope you enjoy this mod!