XTool Corner Thingy

thingiverse

I needed something that would hold the material tight against the corner jig when I was engraving or cutting on my XTool D1 Laser. I needed something that was thinner than any of the material I was working with but stiff enough to hold it in place. I put a knob/handle at the end opposite the end that was actually pushed against the material to be able to lift or move it as needed. Beneath the handle is a pocket to glue a 14.90 mm diameter by 1.65 mm magnet to hold it in place on the honeycomb. I printed it on my Bambu Labs X1 I used the default setting for PLA+ I used the largest magnet in this set I got from Amazon . Here is the link: https://www.amazon.com/DIYMAG-Different-Neodymium-Refrigerator-Building/dp/B09TVXL3DZ/ref=sr_1_3?crid=33OYRXXVC94WW&keywords=magnets&qid=1691446064&refinements=p_89%3ADIYMAG%2Cp_n_feature_browse-bin%3A23962442011&rnid=23962324011&s=industrial&sprefix=magnets%2Caps%2C156&sr=1-3&th=1