Xiaomi yi gimbal enclosure - no screw type

thingiverse

The cam is firmly locked in place, yet can be easily detached when necessary without the need for a screw or complicated mechanism. To remove it, you'll require: 1x M2 screw measuring 6mm long 1x M2 nut 4x M2 inserts (2.5mm in length, although you may be able to force 3mm inserts into place by heating them thoroughly) The design can be printed without support. For optimal results, I recommend printing with an infill of 25% honeycomb pattern using ABS material, which will yield a weight of approximately 12g per print. Three perimeter layers are recommended for a sturdy finish. Note that the shaft diameter is 3mm, but you can drill it up to 5mm if needed. **UPDATE: Main Case v2** I have made some adjustments to the design. The mounting hole has been shifted closer to the center of gravity, and I've added extra thickness to the holes for the M2 inserts. Additionally, I've included a sensor board cover (although it hasn't been tested yet; I'm still using the stock one). **Print Settings** * Printer Brand: RepRap * Printer Model: Prusa i3 custom * Rafts: No * Supports: No * Infill: 25% honeycomb