Xiaomi Sphere adapter for Amazon Basics monopod

thingiverse

Turn the AmazonBasics 170cm Monopod into a selfie Stick for the Xiaomi Sphere camera. I added the OpenSCAD file. Most of the comments are in German, sorry! You should edit the source if you use a different button, tripod screw or monopod. Apart from the printed parts you need: - 2 screws M3*8-10mm, ISO 4762 / DIN 912 - 2 M3 nuts - 1 1/4" tripod screw, less than 21mm head diameter - 1 pushbutton, I used this: https://www.adafruit.com/product/1009 - cable, still looking for a good solution. I tried to make my own spiraling cable, but it keeps the rod from collapsing properly. - something to connect to the camera's contacts. I soldered the cable ends to a small piece of perfboard and left about one mm sticking out. This kind of works, but two short pogo pins would be a far better solution. EDIT: These might be perfect: http://www.dx.com/p/lson-2-0-3-2mm-current-pogo-pin-probe-golden-25-pcs-310969 Printed in ABS with 0.4mm nozzle and 0.1mm layer height. I printed the head part flat to increase strength.