xDrip Wireless Bridge case v1.7

thingiverse

Case (v1.7) for the xDrip Wireless Bridge measures 85.6 x 54 x 7.2 mm in size. The board requires a Li-Po charger, specifically TP4056 (microusb), with a maximum size of 27 x 19 mm. Note that you should resolder Rprog to 3,9 kOhm. Any kind of BT module will work, including HM-10 or HM-11. For the HM-10 on support board, solder the (+) wire from Wixel (pin P1_0) directly to a HM-10 module (pin 3.3V). Print a test_box.stl before printing the case and provide feedback. A flex bumper model is available for printing with flexible filament like REC Flex or NinjaFlex. These prints use thermoplastic elastomer (TPE), producing elastic properties. Use 3M blue scotch tape on your hotbed. Print settings are 0.10 layer, 0.3 nozzle, 0.33 extr.width, and 2 perimeters. The xDrip project is located at http://stephenblackwasalreadytaken.github.io/xDrip/. For instructions, see https://github.com/jstevensog/wixel-sdk/blob/master/apps/xBridge2/xBridge2.pdf. The Wixel Configuration Utility can be downloaded from https://www.pololu.com/file/0J448/wixel-windows-121129.zip. The xBridge2.wxl app is available at https://github.com/jstevensog/wixel-sdk/tree/master/apps/xBridge2. Print settings for the SquareBOT printer are 0.10 layer, 0.4 nozzle, 0.33 width, and 2 perimeters with an infill of 80%. After printing, fix the top cover with ABS by using acetone.