xconnect extrusion clip

prusaprinters

clip for the extruded part of the xconnect end.  It holds in place with a zip tie.  Made for the female end of an xconnect.   Slides in over the last bump on the cable and won't rotate, if using 2.  Suggestion use 2 and line up the clip end with the notch on the cable, this way in the dark you have a 50/50 chance of getting the cable inserted correctly.   Print with the numbers flat on the bed. Can be printed without AMS/MMS, simply change filament as follows1-5 outer color (aka black)6-8 white9+ blackIf printing in PETG make sure your filament is tuned.   Textured PEI plate recommended.  Print with flat number side down. Printing settings (differences compared to the strength .2 profile for bambu studio).2 layer heightbottom shell layers = 6bottom shell thickness 1sparse infill density 10 honeycombwall loops 2top shell layers 6top surface pattern monotonic no brimInner wall acceleration 5000outer wall speed 60 wall generator Arachneminimum wall width 60%  Only one wall on the first layerprecision resolution .001seam position backbottom z distance 0top interface layers 3top z distance 0