Xbox Series X Controller & Headset Mount

thingiverse

Based on "mikebin41" Xbox One Controller & Headset Holder: https://www.thingiverse.com/thing:2188329 Share your print! If you like this, give it a like/comment! This is my first published design so it will really help! I have taken mikebin41's wall-mount design and adapted to allow to mount onto the side of the Xbox Series X by utilising hangars which sit on the side of the console vent. For aesthetics, I have also added the Xbox logo to the top of the mount and removed the screw holes from the original design. EDIT: I have also added reinforcement to the controller shelve (top) to avoid potential breaks (not seen in pictures) ====================================== I used tree supports - Post diameter: 2.0mm / Base diameter: 3.0mm / Base height: 1.0mm Layer Height: 0.18mm Nozzle Size: 4.0mm Material: PLA / 1.75mm I applied auto mounts, which are attached to the hanger bracket and the embossed Xbox logo.