Xbox 360 Wired Controller USB C Bezel (HDR's v1.4 update)

thingiverse

"for hard plastics like PLA, PETG, ABS, etc"This is an update for the original bezel v1.3 by MAKHO. All credits go to him, and this is just a tweak on his prior model, which makes it suitable for v1.4 of the custom PCB Board design made by HDR.All i did was carving a hole in it with TINKERCAD, making it compatible with the newer custom board, which sets up differently from v1.3's design, v1.4 changes it's usb connector for a more stable, USB TYPE C 31-M12. This should be more durable, however the old bezel model does not work anymore with the new connector piece setup.IMPORTANT NOTE:DO NOT TEST THIS BY SOLDERING IT TO CONTROLLER AND PLUGGING IT INTO PC. A MULTIMETER MUST BE USED FIRST, FOR CHECKING IF THE PCB-CONNECTOR PIECE SETUP WORKS CORRECTLY BEFORE EVEN THINKING OF MOUNTING THIS ONTO A CONTROLLER. IF YOU DO NOT DO IT THIS WAY, THERE'S A VERY HIGH CHANCE OF ENDING UP LIFTING YOUR CONTROLLERS SOLDERING PADS UP. POTENTIALLY RENDERING IT UNUSABLE.You should also probably get 0.8mm boards preferably, if you get this mod wrong with a thicker board, then when you remove it from the controller it's very likely to lift the soldering pads out. And fixing that messup requires experience as well as practice, so be careful with your stuff (again, test the piece with a multimeter first).• :: HDR's GITHUB POST FOR THE CUSTOM PCB :: https://github.com/HDR/Xbox-360-USB-C-Mod.• :: MAKHO's VIDEO SHOWING HIS SETUP FOR THIS MOD :: https://www.youtube.com/watch?v=VEEc5_EpDGk• :: USB TYPE C 31-M-12 :: https://es.aliexpress.com/item/1005004640466117.html?spm=a2g0o.order_list.order_list_main.11.59fa194dXqxosw&gatewayAdapt=glo2esp