Xbox 360 Controller Li-ion battery conversion
thingiverse
<h1>Risk Alert! Modify your controller at your own peril. I disclaim all liability for any resulting damage.</h1> Description for fearless experts who know exactly what they're doing: To proceed with confidence, you'll need a TP4056 Li-ion charging board with discharge protection built-in. Two ICR14500 Li-ion cells are also required. Additionally, a 1n400x diode is necessary to slightly lower the output voltage. You'll also need nickel strip, 6mm wide, an ss12d00g4 (4mm) toggle switch, and a self-tapping screw. The diode's purpose is to reduce the output voltage by approximately 0.7v. Since fully charged Li-ion cells reach 4.25v, this drop brings the final voltage down to around 3.55v - remarkably close to two new alkaline cells at 1.65v each. I initially ran my controller without a diode and it performed flawlessly under 4.25v, but for added safety, I decided to add one. Compared to NiCd batteries, this mod significantly extended the working time of my controller. Moreover, I can now plug in the charging cable at any moment and continue using my controller uninterrupted.
With this file you will be able to print Xbox 360 Controller Li-ion battery conversion with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Xbox 360 Controller Li-ion battery conversion.