X-Row Kuro King Parts

thingiverse

I've designed a few parts for the X-Row Kuro King. I've designed updated front shock mounts that will allow mounting a 9g servo for the front steering. I also designed a new rear tray to hold 2x 4.3g servos for controlling the shifting between high/low as well as the differential lock. This was designed to allow space for a larger motor. I've got a design for a Micro Komodo to mount to an N20 gearbox. This is a bit of work to make it adapt. I have not made this for the springtail, though it can be tweaked to work with it. The micro komodo requires either reducing the output shaft to 1mm and installing the larger micro gearbox pinion (the ones that come on Orlandoo 500rpm gearboxes, or boring out a gear to 1.5mm to fit the shaft. This also requires a specific N20 gearbox. It is the same gearbox used on the 1:20 ratio Springtail. (Also, the springtail comes with the motor shaft reduced in diameter already). The gearbox can be found here: https://www.amazon.com/gp/product/B0B2RMP8Y3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 specifically the 12v 1000 rpm box. If you can't purchase from here, look at the furitek springtail for 1/32 cars and buy a gearbox with a matching larger centered outer gear. Again, this current design requires the larger pinion as well, which will need to come from a different motor. I am confident with a little modification to the Furitek Springtail and the design, this motor plate would work.I would CNC milled aluminium for the motor mount, as the motor gets warm and could melt the plastic.