x-carriage and hotend mount for Hypercube Evolution Prusa MK3 Bowden

thingiverse

I was not entirely satisfied with the hotend- and part cooling fan setup in the Hypercube Evolution. I opted for the hotend-mount designed specifically for the Original Prusa MK3, removed the stepper motor mount, and attached it to the x-carriage instead. This required removing multiple holes and adding new ones to make mounting as seamless as possible. Additionally, I had to modify the top part of the hotend mount to accommodate space for the nut and the shorter heatsink. To fit the ir probe for the duet wifi, I added a mount: https://miscsolutions.wordpress.com/mini-height-sensor-board/. This necessitated trimming down the fan-duct for part cooling. The fanduct design is still in development; you can use a simple 3mm spacer and employ the "original" MK3 fandcut as a temporary solution, which I currently utilize. The LM10UU x-carriage and belt-clamp by geoffsim were modified to accommodate the MK3-derivated parts. This hotend-mount completely eliminates the need for endstops; if you still want to use them, you'll have to devise your own solution (I use skipped step detection on the Duet to home the x/y-axis). This design is tailored for the "new" E3D threaded heatsink: https://e3d-online.com/v6-threaded-heatsink. To assemble this hotend mount, you will need: * 1x 50 blower fan (part cooling) * 2x 40mm radial fan (cold end cooling) * E3D V6 with threaded heatsink * M3-Screws and nuts (you'll require 2-4x M3x45 screws to attach the hotend mount to the x-carriage)