X-78R: Brushed Micro Racing & Freestyle Quadcopter Drone & Tiny Whoop Frame

thingiverse

It appears that the text you provided is a guide on how to build and print a custom drone frame, specifically designed for a Tiny Whoop 26 x 26 mm Flight Controller. The guide covers various aspects of the project, including: 1. **Frame Selection:** The designer offers three frames with different clearance options: exact measurement of 7 mm, clearance of 0.05 mm for diameter of 7.05 mm, and clearance of 0.1 mm for diameter of 7.1 mm. STL files are labeled accordingly. 2. **Build Instructions:** The frame is designed to fit a standard Tiny Whoop 26 x 26 mm Flight Controller. Build instructions include using a standard Tiny Whoop build method, utilizing holes at M1 (1 mm) for tiny screws, and protecting motors with heat shrink. 3. **Printing Guide:** The designer suggests printing the frame in common filament materials like PLA, PETG, ABS & NYLON. An infill of 14.5% with the "Tri-Hex" pattern is recommended for maximum strength. Experimentation with different infills and filaments is encouraged to achieve optimal results. 4. **Flying Advice:** The designer cautions against landing on motor bottoms or corners of arms, as printed frames are not carbon frames and require gentle treatment. Bottom mounting the battery is advised for longevity. 5. **Originality of Design:** The designer emphasizes that their design is an original work, created from scratch, with unique geometry and features to prevent copying or infringement. 6. **Legal Disclaimer:** The designer disclaims any liability for direct, indirect, punitive, incidental, special consequential damages arising out of or connected with the use or misuse of their designs. Overall, this guide provides a comprehensive resource for building and printing custom drone frames, emphasizing originality, safety, and experimentation to achieve optimal results.