Wyze Video Doorbell Pro Fully Adjustable Mount

prusaprinters

<p>I wanted a mount for my Wyze Doorbell Pro's that I could easily adjust horizontally and vertically after mounting and could not find a viable solution, so I created one.</p><p>I originally intended only to use double-sided outdoor foam tape to hold the base of the mount but quickly discovered that it failed within a day for various reasons. So I switched to tape and screws to ensure the doorbell would not fall off under normal circumstances.</p><p><strong>Update:&nbsp;</strong> I was recently asked about this design's stability since the doorbell is on a somewhat extended arm. Due to the quality of the ball and joint components I bought on Amazon for it, there is very little movement when the button is pressed or when gusts of wind hit it. This very slight movement is unnoticeable when viewing the video created during testing. I suspect that the camera and its software compensate for such things. I have, on several occasions. watched the live view on both my doorbells as storms and high winds buffet the house, with the same results, a very stable image.</p><p><strong>This project is designed for the Wyze Doorbell Pro only.</strong></p><p>Hopefully, this solution will be useful to others.&nbsp;</p><p><strong>I included the Fusion360 file if you want to modify it for a different Doorbell.</strong></p><h3><strong>Print Settings</strong></h3><ul><li><strong>Filament: &nbsp;</strong>PETG or other Filament that can handle direct sunlight and weather.</li><li><strong>Layer Height:</strong> &nbsp;0.2mm</li><li><strong>Perimeters:</strong> &nbsp;3</li><li><strong>Infill:&nbsp;</strong> 25%</li><li><strong>Nozzle:</strong> &nbsp;0.4mm</li></ul><h3>Complimentary Project</h3><ul><li>Enclosure for two Wyze Chimes to hang on the wall.<ul><li>https://www.printables.com/model/251178-wyze-doorbell-pro-chime-wall-mount-enclosure-for-t</li></ul></li></ul>