Wyze v2 bracket for camera mount

prusaprinters

<p>This is a simple adaptor to mount a Wyze v2 camera on a camera mount arm. I've used this with <a href="https://www.thingiverse.com/thing:2998011">https://www.thingiverse.com/thing:2998011</a> for example. I'm sure it can work with other mounts too, that takes a ¼" screw to mount sideways.</p><p>I did not add an indent for the round, meta plate (for the magnets in the Wyze stand). I made a design for it, but I really don't think it's necessary because the bracket is a pretty snug fit.</p><h4>Printing</h4><p>I'd recommend printing it with the flat end down, and do a “paint on” support for the overhang at top. This printed easily for me, and the support comes off easily. You can set a good XY-distance on the support (like 120% or more) to make it even easier to remove. It just needs to help support the long bridge.</p><h4>Using</h4><p>Well, this is pretty straight forward, use the Wye's movable “arm” to adjust the angle, and then use e.g. hot glue to put a few dots down to make it stable. I did a string on several sides to just to make sure the camera can not move even when my clumsy hands touches it. [See second picture].</p>