Wurrkos TS10 Headband Mount
prusaprinters
Note: This is still a work in progress. Let me know if you discover any issues.An easy to print headband mount for your Wurrkos TS10. Suitable for headbands up to 25mm wide and up to 3mm thick.One end of the mount is chamfered to make it easier to mount the torch.If you can, print in PETG or ABS (or similar) for better heat resistance. PLA will work, but be wary of heat build up from the light.---------------------------------------------------------------------------------There are 2 versions of the model:"TS10 Headband" - Original version. Should be suitable for most people.“TS10 Headband looser” - Alternate version with slightly looser tolerances. - use this if the original one is too tight. Print settings (0.4mm nozzle)Layer height: 0.3mm4 walls3 top/bottom layersInfill 20%Brims: optionalSupports: no
With this file you will be able to print Wurrkos TS10 Headband Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Wurrkos TS10 Headband Mount.