Wrench socket for NASA space wrench

prusaprinters

<p>After I had printed the NASA space wrench in PETG, I realized that the wrench is actually tougher than I thought. I put a metal socket on it and it felt like it could really be able to tighten some screws.</p> <p>Since I needed something to practice my FreeCAD skills on, I decided to copy the metal socket and print it out in PETG. The results are very pleasing in my take. The only downside that I found out after printing is that my arbitrarily chosen 12mm wrench size is not very common. So I will probably adapt the design in the future to something more common, e.g. 10mm or 13mm.</p> <h3>Print instructions</h3><h3>Category: Hand Tools Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> I3 MK3S</p> <p><strong>Rafts:</strong> Doesn't Matter</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0,15mm</p> <p><strong>Infill:</strong> 15%</p> <p><strong>Filament:</strong> Prusament PETG PETG orange<br/> <strong>Notes:</strong></p> <p>Print time 47minutes on Prusa i3MK3S in normal mode.</p>