WPL ESC mount

thingiverse

Please do not copy or sell this without my permission! This is a replacement piece for the front servo tray, designed to fit your needs perfectly. If you move the servo to the axle (check out my kit axle servo mount here: https://www.thingiverse.com/thing:3576621 ), you'll have ample room to mount your esc and receiver up in the original servo location. I've made some minor tweaks to add more clearance after these pictures were taken, and those files are now available for upload. The ESC used in this design is the Hobbyking Xcar 45a brushed ESC. https://hobbyking.com/nl_nl/hobbyking-x-car-45a-brushed-car-esc.html This piece should work with other ESCs that have a similar shape and dimensions no larger than these. The two holes in front of the Servo opening can be used to mount the front section of the body. Simply use 2 small M3 screws, which will screw into the standard bumper mounts. Keep the bumper mounted securely to the front of the body. The back part of the cab (front body) hooks under the bed (back part of the body). The interior can be used with this ESC! Later on, I mounted a piece of plastic over the opening for the servo by screwing it down using 2 self-tapping screws. I then mounted the receiver onto this piece of plastic using double-sided tape. This will eventually be integrated into the 3D part. I also added two holes so you can use a small tyrap to hold the ESC securely to the holder.