WPL C74 Shackle Reversal/Front Subframe

thingiverse

Still work-in-progressI designed a shackle reversal sub frame for the WPL C74 Suzuki Jimny. The inspiration came from the A&M garage shackle reversal kit for the Rc4wd Tf2. The body will most likely need to be trimmed upon full compression of the suspension when the wheels are turned and you will need a longer metal driveshaft.The front leaf mount was moved 12mm forward and 2mm down from its original position and the rear shackle mount was moved forward to match the distance from the stock leaf mounting holes. The front bumper cannot be mounted with this mod without some modifications as the bumper mounting screw holes are covered by the front leaf mounts. Underneath the new sub frame is a spot for a hobbywing 1080 power button where the original WPL on/off switch was. The printed front body mounts will need to be pushed through the bottom of the holes in the servo location and glued into place. (You will need to print two, and are not currently shown in the pictures but the file is attached as "pin undated".)