World trade center Twin towers

thingiverse

Revision 11 - 11-05-2018 : Every component has been printed. I've added two more images. I've learned to be patient and simply use the 0.4mm nozzle, the 1mm and 0.6 make it look too rough for my preference. I'm going to sort out the lighting this weekend and install an antenna with a light on top. Revision 10 - 08-05-2018 : I've added five more images, I am 90% there now! Revision 9 - 04-05-2018 : (May the 4th be with you!) I've added two images today of the next section that I have printed. At home, I'm printing the final tall section before I do the roof. Revision 8 - 01-05-2018 : I've removed the core! I refreshed the files. The core has been left in the base like in the original. Revision 7 - 30-04-2018 : I did not succeed with the 1mm nozzle BUT I was successful with the 0.6, so it's coming along a bit quicker now and resolution is not too bad, I've added four more images, tested the lights and all working!! Revision 6 - 27-04-2018 : I've added a stronger base called base_print upside down_01_better. It has a bit of extra glass to help support the columns. I have not printed the original yet but I am afraid it won't hold too well so I made this second version Revision 5 - 26-04-2018 note: If you would like to see the built progress of this project, you should do so by following me on Instagram. I am posting there almost daily. Look for Hugo Archicad on Instagram Revision 4 - 23-04-2018 : I'm 3D printing one of the tallest parts now (I'm doing it on a CR-10 and it will be big so it's taking a while) Cura says it will take five days, so after this segment, I will attempt to print it with a 1mm nozzle to speed things up. I have attached the first three images after sixty hours of printing. I've had a soft spot for this beautiful building design I've been wanting to model it for a couple of years now I've finally done it. Broken up in parts to fit a CR-10 at 1:100 scale I will start printing this shortly just waiting on the filament to arrive. Once done, I will put perspex at the glass line at the podium level (base) Six parts in total