Working Ultimatrix chest piece - Ben 10

myminifactory

The following symbol will be easy to recognize if you've seen this series. This form of omnitrix appears in the game: Ben 10 Ultimate Alien ™ Cosmic Destruction, and surely in some other. Ben 10 is an animated series produced in the United States created by "Man of Action" and produced by Cartoon Network Studios. The pilot episode was released on December 27, 2005, its second episode aired on January 13, 2006, and the last episode was aired on April 15, 2008. The developed, improved, and modified form of the Omnitrix is the Ultimatrix system. This new system has all the powers and capabilities of the Omnitrix, the power and ability to become the aliens of Ben before and in their new versions of them; with the ability to bring them to an evolved version of them making them much stronger, with much better and more powerful capabilities. To activate this change, Ben presses the Ultimatrix / Super Omnitrix command prompt, taking four points and transforming the alien into its supreme form. To assemble it you will need 4 small springs, the ones that I have used are spent bolts' springs, from these bolts I removed a piece that I didn't need. The pieces can be painted before or after assembling them. In my case, I have done it before, to do it I sanded all the pieces after printing them, gave them a couple of layers of primer, sanded them and finally painted them using acrylic paints. Assembly instructions: 1. Print all the pieces, the piece points must be printed 4 times. 2. Place the pieces (points) in the base, placing the springs inside them. This is easier if the base is flat and on this we place the springs and then the pieces (points). Before moving on to the next step, I would recommend sanding, printing, and painting the pieces (points), since then it will be more difficult to access them. 3. Once the previous step is done and only when this is done can you paste the upper part of the base to the lower one. Prove that the mechanism works before pasting the pieces. In case it costs a lot to remove the pieces, it may be because the springs have too much force. 4. Finally, all that remains is to screw the part with the symbol until the pieces (points) start to come out when you screw.