Working Turbo v1.1 OUTDATED

thingiverse

IM NOT 100% SURE IF THIS FILE IS STILL ANY GOOD, PLEASE LET ME KNOW IF YOU PRINTED IT AFTER 2019 SO I CAN UPDATE THIS TEXT TO MAKE SURE IT STILL WORKS. ALSO YOU CAN NOW REMIX IT IF YOU WANT. Working Turbo Fantilator v1.0 - Scale Working Model by KimboCake. Update v1.1: Uploaded an Air Filter and an Exhaust System, working with 2 M3 Bolts and Nuts. Exhaust is in 3 Parts, Part 3 is not really needed, only if you want it, you can even print part 2 and 3 multiple times, depends on how big and long you want the exhaust to be. I used some parts of this model: http://www.thingiverse.com/thing:1359560 But I could not get it to work, so changed most of it. Now it works without much needed! Working Model of a Turbo Charger. Over 72 hours of printing!!! Hardware Kits are available for about $20 max, you can buy the parts I used from here: Electric Engine: https://www.conrad.nl/nl/motraxx-xslot-race-143-brushed-mini-elektromotor-24000-omwmin-238825.html Rocker Switch: https://www.conrad.nl/nl/a12131121000-wipschakelaar-250-vac-10-a-1x-uitaan-vergrendelend-1-stuks-701661.html As for the battery, you could use anything as long as the voltage is between 6 and 12v. I had this old RC battery laying around for years, its a 7.4v 800mhz battery. The electric motor that powers it is a 6v / 12 V 24000rpm brushed motor. Shaft Size: 1.5mm Motor Body Length: 19.4mm/ Width: 14.8mm/ Height: 10.8mm Print Settings Printer Brand: Gembird i3 Printer: Prusa i3 Rafts: Brim (not necessary) Supports: Yes, not all parts tho. Resolution: .2mm Infill: 30% Notes Recommended to print the turbo housing, turbo mid, and turbo exhaust on highest quality for better looks. Please do not steal my design, and give credits to me. Tips are welcome, but not necessary. Feel free. This project might get more Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 30 Notes I recommend setting higher settings for the Turbo housing, exhaust and middle parts for better looks. Have fun! Please credit if you share. Post-Printing How I Designed This Used a bit of Sketchup, Meshmixer and 123D design