Worker Phoenix 2.0 N-Strike Stock Lug

thingiverse

These are digital .stl files to an adapter allowing use of N-Strike style stocks on the Worker Phoenix dart blaster. Materials Required: - 35g PETG filament - 3d printer - H 2.0 Hex Head Screwdriver - Hobby knife Assembly Instructions: 1. Print Parts: I Highly recommend printing with PETG as layer strength is critical with these parts. Use at least 4 perimeters and 25% infill and no supports when printing. See "Print Orientation.PNG" for the correct part orientation 2. Remove the original Phoenix stock and sling loop/rear sight parts using an H 2.0 screwdriver 3. Finish Parts: The lug holes in the stock parts have modeled-in supports that must be carefully removed using a hobby knife. While you have it out, verify that the stock parts fit together and over the original lug. If you encounter undue resistance pressing the part on, carefully remove material to achieve snug fitment. 4. Affix Stock Parts: using the original screws, secure the stock parts to the blaster 5. Enjoy: Add your favorite N-strike stock and go show 'em what for!