WorkBee CNC router shop-vac dust shoe

prusaprinters

<p>A dust shoe for the De-walt (Probably fits others) router on the Workbee CNC router.<br/> Requires 8 x 8mm Neo Magnets, 2 x M10 bolts (or threaded bar), 2 M5 bolts, and a brush strip.<br/> The 2 M10 bolts or bar are for locating pegs, the screw into the upper shoe and protrude down, the lower shoe locates over them to prevent any twisting.<br/> The 2 x M5 screws should be gently tightened onto the router, the upper shoe is a tight fit on the router, it will need some pushing on, then the two M5 screws hold it in place, they only need to be gently tightened.<br/> Magnets should be superglued into the 8.2mm holes. - Make sure you polarize them correctly or fitting it could be amusing-.<br/> Brush strips (available online from most big general tools retailers) - Also available from Ooznest, can be glued into the lower shoe.</p> <h3>Print instructions</h3><p>2 x G-code files, one PLA, one PETG, just print the one you need.</p>