Work stand for scale plane models
thingiverse
I designed a stand for RC plane models some time ago, which can be found on Thingiverse at https://www.thingiverse.com/thing:3904218. This particular model was created for a friend who specializes in scale plane models. To print the stand, use these settings: Layer Height: 0.2 mm Outlines/Perimeters: At least 2 are recommended. Infill: A minimum of 20% is required. In addition to printing the provided parts, you will also need the following items: Two M5 carriage bolts, each measuring 20-30mm in length. Two M5 nuts. Four M3 bolts, two of which should be 12 mm long and the other two 15 mm long. Eight M3 nuts. Two pieces of tube or rod with an 8mm diameter and a total length of approximately 30 cm. A small sheet of thin rubber.
With this file you will be able to print Work stand for scale plane models with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Work stand for scale plane models.