Wooden Farm Fence replacement for Wooden Farm Set

prusaprinters

<p>This is a replacement part for the Wooden Farm Set of my kid (see the picture for the original set and the original fence). He lost one so I measured and designed an exact copy.</p> <p>You can print the entire thing pre-assembled, but that gave me a little hang on the horizontal bars. So I also designed the parts separate and you can just plug them together. If you want to be sure that your kid cannot get it loose just put a little glue in the holes before attaching the bars on the pilars.</p> <h3>Print instructions</h3><p>Unassociated tags: farm set</p> <h3>Category: Playsets Print Settings</h3> <p><strong>Printer Brand:</strong> MakerBot</p> <p><strong>Printer:</strong> <a href="http://bit.ly/2DN01Rf">MakerBot Replicator Mini+</a></p> <p><strong>Rafts:</strong> Yes</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0,20mm</p> <p><strong>Infill:</strong> 20%</p> <p><strong>Notes:</strong></p> <p>Printing the fully assembled fence gave me a little hang on the horizontal fence-bars.<br/> My best result was by printing the parts separately and then joining them together by pushing the bars in the pilar-holes. If you want to be sure it won't get loose you can just put a little glue in the hole before attaching them.</p> <p>On my makerbot the best result for the bars was when I printed them vertically (as in the design file).</p> <h3> Post-Printing</h3> <p>Let the kids start playing!</p>