Woman body optimised for vase mode

myminifactory

Highly Optimized Vase Mode Settings Ensure Easy and Fast Printing! Recommended Cura, S3D, and Slic3r settings for a 0.4 mm nozzle are: * Special Modes -> Spiralize Outer Contour * Layer -> Single Outline (Vase Mode) * Print Setting -> Spiral Vase No Support Required! **Optimized Settings:** 50% Size (30 minutes): + Layer Height: 0.10 - 0.11 mm + Line Width/Extrusion Width: 0.55 + Speed: 30 mm/sec or slower! + Minimum Layer Time: 3s + Temperature: +5°C + Fan: 75% 100% Size (90 minutes): + Layer Height: 0.12 - 0.13 mm + Line Width/Extrusion Width: 0.65 + Speed: 40 mm/sec or slower! + Minimum Layer Time: 6s + Temperature: +10°C + Fan: 75% 200% Size (230 minutes): + Layer Height: 0.16 - 0.17 mm + Line Width/Extrusion Width: 0.8 + Speed: 50 mm/sec or slower! + Minimum Layer Time: 10s + Temperature: +15°C + Fan: 75% **Advanced Optimizations:** * Head cut at a greater angle for improved overhang * Slightly lower shoulders for better overhang * Reduced pit above the clavicle * Adding venetian dimples * Most proportioned body * Increased definition between legs and buttocks * Fixed hole between legs