Wolfcraft 2625 chuck handgrip

thingiverse

This is a Wolfcraft mod. 2625 chuck handgrip. Allows handling of small bits and other tips with diameters between 0.5-6.5 mm. The screws secure the stem in place and prevent it from rotating inside. The brass tube is sourced from an electrical connection plug, measuring 8 mm in inner diameter, 11.5 mm in outer diameter, and 13 mm in length. Insert this part into the upper section before gluing both parts together. If a tube of these dimensions is not available, see Wolfcraft 2625 chuck handgrip refurbished. Use PVC pipe adhesive or acetone for ABS prints. When editing the FreeCad design, cut the STL file on the Z axis to 8.01 mm using Netfabb. Rotate the bottom part 180 degrees before printing. Printer Brand: Prusa Printer: Prusa Steel Rafts: No Supports: Yes Resolution: 0.4mm hotend - 0.2mm layer height Infill: 40% Notes: Print in ABS, 3.2mm wall thickness I designed this project using Freecad, Netfabb, and Cura 2.3.