Wizard - Demons And Dice: Mini Builder

thingiverse

This miniature has been designed with Demons And Dice: Mini Builder. If you want to design your own miniatures, check our website: http://demonsanddice.ddns.net/mini-builder/index.html. Download the open beta version of the app. **Print Procedure** _Note: Due to the small parts that have this miniature, SLA printer is recommended._ To generate supports for the miniature, I follow these steps: > Open Meshmixer. >> Import the *.obj file. >> Go to Analysis >> Orientation. >> Configure this tool with the next parameters: >>> Overhang Angle: 45 >>> Fit to Print Volume >>> Strength: 1 >>> Support Volume: 0 >>> Support Arena: 0 >> Choose the orientation that will generate supports on the back of the miniature. >> Accept the new orientation. >> Export the miniature. > Import the oriented miniature into your 3D printer program. >> Add supports. >> Generate the file for your printer. _Note: I prefer not to generate supports with Meshmixer because I have encountered problems with supports that are too close to the miniature, causing them to join with miniature parts and make it harder to remove them once printed._ _Note: To generate supports (with CHITUBOX 64, and for my Sparkmaker FHD printer), I use the following configuration: > Z Lift Height: 4.00 mm > Contact Shape: None > Contact diameter: 0.30 mm > Contact Depth: 0.20 mm > Connection Shape: Cone > Upper Diameter: 0.20 mm > Lower Diameter: 0.70 mm > Connection Length: 2.00 mm > Auto Support: >> Minimum Length: 5.00 mm >> Cross Start Height: 3.00 mm >> Density: 50% >> Angle: 45