Wiring Spacer for Photon Mono X - REV 02

prusaprinters

REV 02.  Fixed a few issues.  Part now works better.File and Print Notes:Files include a support body, to allow the ledge to print without connected supports.  It is spaced 0.25mm below the layer it supports, and has peeled freely each time i've printed it. Wire opening for heater wire is 4.5mm.  If you're using heavier wire, you might need to modify file, or the printed part.I print these in ABS, with 4 perimeters, 0.2mm initial layer, 0.2mm layers, with a 0.4mm nozzle.  STEP and STL are not scaled for material shrink.  For me, printed at 100.4% x and y makes for perfect part, in ABS.  Adjust if needed.  Part fits my Photon Mono X, purchased approx May-2021.  I know they have made some changes to the lids throughout production.Adhesive & Foam tape:  I have not needed to yet, but planned to apply 0.002" transfer tape between the printer base and the bottom of spacer, and 1mm foam tape between Spacer and UV Shield.  I'm not sure how well the foam will hold up to resin environment.