Wireless weather station v2 - Rain gauge - Pluviometer

thingiverse

Weather Station V2 ==================== This is the new version of my wireless weather station. It will be composed as different parts : - The rain gauge sensor (this part) - The radiation shield for the SHT31 and BME280 sensor, that measure temperature and humidity (https://www.thingiverse.com/thing:4120452). - The particule matter sensor (https://www.thingiverse.com/thing:4147660). I will add after a wind speed meter. # Rain gauge - Pluviometer You need : - A rod of 3mm diameter and 30mm length (steel, aluminium...) possibly a little filed down to reduce to 29.5mm. - A reed switch 1.8x7mm - A round neodymium magnet 4x2mm - 2 bolts M3x6mm - 4 bolts or screws to fix the base on your support. - Wires, connector as you like to connect to the reed switch. - A drop of glue to fix the magnet. You can put your own adapted sensor into the slot on the bucket's side. The funnel is screwed to the base through the printed threaded. The small tower behind the sensor is for securing the output wire with a cable tie. ----------------------------------------------------------------- It uses the Aubend's Poor man's openscad screw library (https://www.thingiverse.com/thing:8796) for the thread.