Wire Winder

prusaprinters

<p>10-1-2021 - My tired old eyes have a challenging time seeing the difference in the USB connection types. To help this I have added a label to the screws that identifies the type of USB connection i.e. USB micro, USB C, USB mini</p><p>4-10-2021 - I have added additional winders. These are the same size but have detents to impend the unwinding of the wire and screw. The detents are not deep so you can still wind and tighten the screw as needed. The additional files have the letter ‘D’ added to the size winder. The screw is the same for all the wire winders.</p><p>Wind wires to shorten, transport or store - will work with most USB and lamp cord wires</p><p>There are five sizes that vary in diameter and height</p><h3>Print instructions</h3><p>the Prusa code is included, all the screws are the same just the winder part varies - use 2 perimeters and 15% infill - I used PLA but the filament type is not important</p><p>the files are listed by size - the first number is the nominal diameter in mm, the second number is the height</p><p>This is my own creation using Fusion 360</p>