Wire Dispenser - Easy and Stackable - Organizer

thingiverse

I've designed an easy-to-print wire dispenser. There are two versions: - Five larger reels (box5 + 5x reel5 + 5x cover) for thicker cables - Ten smaller reels (box10 + 10x reel10 + 10x cover) for thinner cables We all have messy cables lying around, and this solution is a nice fix. It's stackable because the box remains the same size regardless of the number of reels, and it's an easy print job. Just print the box and reels, then assemble the reels (I've glued them together), and wind the cable onto the reel. When all the reels are filled up, insert a rod from the side and that's it! You can use 6mm plastic, wooden, aluminum, brass, steel rods, tubes, or sticks instead of printing them. I used brass tubes I had lying around and needed to be about 152mm long. There's also a top plate inside that you can print if you work in a dusty environment. Silicon wires are available worldwide (higher AWG means thinner wire): - 5m red silicone wire 10-22AWG = goo.gl/cS9CJq - 5m black silicone wire 10-22AWG = goo.gl/qWd5f9 - 1m red + 1m black 8-30AWG Silicone wire = goo.gl/trVNzV - 1m red + 1m black silicon wire 12-20AWG = goo.gl/harFi8 If you find my design helpful, you can tip me with a dollar or two. You can send a tip through PayPal at paypal.me/JureKorber. Have fun! Jure Korber