WIP Concept 8mm 608ZZ bearing camera gyro

thingiverse

WIP Concept 8mm Bearing Camera Gyro Still a concept, the 8mm bearing camera gyro lacks a handle and any means to attach a camera on top of its platform. Print at your own risk. Gyro 4: The updated version of gyro 3 boasts a distinct design from its predecessor. Gyro 3: All slots are now precisely 22.2 in size, reducing the overall dimensions to match those of Gyro Middle 1/2. A GoPro-compatible attachment point is now integrated, eliminating the need for pins. Older Notes: Thing Notes: To install gyro 1, you must forcefully push it into the slots. In contrast, gyro 2's bearings can be easily inserted with minimal effort required. Keep in mind that all bearings may vary slightly in size due to manufacturing differences. 5 x 608ZZ bearings are recommended for optimal performance. Print 4 gyro pins using a separate file. File Notes: Gyro Inner vs Gyro Inner 2: This file remains unchanged, but you may need to use a brim during printing to ensure proper adhesion. Gyro Middle vs Gyro Middle 2: The slot size has increased by 0.2mm on the gyro middle 2, now measuring 22mm in diameter. To achieve a stronger frame and eliminate support layer lines, design changes were implemented. Supports are necessary for printing the small forks on the sides. Gyro Outer vs Gyro Outer 2: The slot size has increased by 0.2mm on the gyro outer 2, now measuring 22mm in diameter. Design modifications resulted in a stronger frame and eliminated support layer lines. No supports are required for printing gyro outer 2. Gyro Pin vs Gyro Pin 2: The gyro pin 2 is slightly larger than its predecessor by 0.1mm in diameter.