Winnie the Pooh

myminifactory

Winnie-the-Pooh, also called Pooh Bear, is a fictional anthropomorphic teddy bear created by English author A.A. Milne. A.A. Milne named the character Winnie-the-Pooh after a teddy bear owned by his son, Christopher Robin Milne, who was the basis for the character Christopher Robin. The rest of Christopher Robin Milne's toys – Piglet, Eeyore, Kanga, Roo, and Tigger – were incorporated into Milne's stories. Two more characters, Owl and Rabbit, were created by Milne's imagination, while Gopher was added to the Disney version. No supports are required. If you have the proper filament colors, no painting is needed. The assembled model stands at 140mm tall. Even though my slicer had no issues with this model, other slicers did not handle some parts well. I updated three parts and added "_new" to them. If you have any slicing issues, please download these parts. Printer: FlashForge Creator X Rafts: No Supports: No Resolution: 0.2mm Infill: 10% Refer to the notes below for helpful printing and assembly instructions. Building the Model Colors (there are no multiple printed pieces) Black: nose, eyebrow_right, eyebrow_left, eye_right, eye_left, hunny_text Red: shirt, tongue, sleeve_right, sleeve_left Gold: head, body, arm_right, arm_left, leg_right, leg_left Dark Brown: jar_top Light Brown: jar_bottom Woodchip (color worked out for me): honey Printing and assembly tips 1. As with most of my models, I strive to make all the pieces support-free. The interesting thing about this model is that I initially could not design the head piece completely support-free around the mouth area. 2. The parts should fit nicely when printed cleanly or with a slight first layer squish. 3. Please note that due to the texture on all the body parts, print time is increased. Be patient printing those parts. 4. Due to the texture complexity of the body parts, slicing may take longer than expected. Again, be patient and you should have no issue with your slicer. Assembly tips 1. The left/right eye pieces are slightly different, but are small enough to be interchangeable. I post all my parts exactly as modeled. 2. The hunny_text letters are intentionally printed reversed. I find that they fit better with the flat side facing out. Since the letters are being attached to a slightly curved surface it is a good idea to bend the individual letters slightly before gluing them on to the jar. 3. Refer to the assembly diagram for putting the model together. The model is meant to be glued.