Wing part, RC P51-D Mustang

thingiverse

We strongly recommend testing the right wing of our North American P51-D Mustang on a robust 3D printing platform. To optimize results, we suggest using Simplify3D slicer or Mattercontrol slicer, both of which have worked well for similar complex parts, but be aware that some slicers like Slic3r might not produce the desired outcome. Please follow these detailed settings found in our comprehensive videoguide: https://youtu.be/Ly4Y9lKVxak?list=PLcpmwpTOtMxSw1Zojy1pLHOgsYaGrVPEy. We also recommend reviewing this additional resource: https://youtu.be/54dsCfXCoeQ?list=PLcpmwpTOtMxSw1Zojy1pLHOgsYaGrVPEy. To ensure the best possible results, please visit our website for further tech support: http://3dlabprint.com. Our team will be happy to assist you with preparing files for your printer and providing additional guidance through a comprehensive userguide. To initiate the printing process: Use a nozzle size of 0.4mm and select PLA as the material. For the first two millimeters, set the print parameters as follows: layer height at 0.25mm, no top layers or bottom layers, two perimeter passes with a width of 2, and 100% infill, using two outer perimeter passes and an inner 1.5mm offset, without support. For the remainder of the print (from two to one hundred fifty millimeters), use the same layer height of 0.25mm but reduce the perimeter passes to one, with zero top layers or bottom layers, and turn off both infill and skirt. Finally, disable all support. Or, you can follow these detailed settings in our videoguide specific to the right wing part: https://youtu.be/Ly4Y9lKVxak?list=PLcpmwpTOtMxSw1Zojy1pLHOgsYaGrVPEy